spray cooling मीनिंग इन हिंदी

उदाहरण वाक्य

1. Spray cooling is the most economical and is the highest efficiency cooling method.
2. A spray cooling piece of equipment can be relined almost endlessly; equipment that lasts 20 years is the norm.
3. Meehan also hopes to have drinking water, sunscreen samples and wide-brimmed hats available near MARTA stations and heavily walked routes, along with giant misters to spray cooling water over the crowds.
4. In the 1940s,  sportsman traffic heading northward along US 395 considered Little Lake an important stop to spray cooling water on boiling radiators, feed hungry stomachs or to get gasoline . 
5. An "'aerosol burn "'is an injury to the skin caused by the pressurized gas within an aerosol spray cooling quickly, with the sudden drop in temperature sufficient to cause frostbite to the applied area.
6. Cooling methods modelled include natural convection ( Totally enclosed non ventilated-TENV ), forced convection ( Totally enclosed fan cooled-TEFC ), through ventilation, water jackets, submersible, wet rotor and wet stator, spray cooling, radiation and conduction.
7. However while a tubular leak is immediately noticed in an operating furnace due to the pressure loss alarms on the panels, at this time there exists no immediate way of detecting a very small volume spray cooling leak.
8. A spray cooling plant consisting of a concrete reservoir 18m by 18m and 1.5m deep with a series of spray pipes and nozzles operated from an electric centrifugal pump, was designed to cool 30, 000 gallons of water an hour.
9. Full thickness solidification can occur as early as 30 % of the way through the mold for thin strip, or up to 2 m beyond the mold exit for large bar where exit water spray cooling and roller support are required.